521 TAB V2 Multi Function Ohms Meter from Eycotech

(5 customer reviews)


In stock


521 TAB V2 Multi Function Ohm Meter


The 521 TAB V2 from Eycotech is a must have for DIY vapers.

It is a well made, solid multi functional ohms meter that will accommodate all of your testing needs in one device. Whether you are new to DIY coil building or an advanced builder, this great quality device has been designed for you.

The 521 TAB is a table top ohms meter, voltage meter and coil building deck that takes 1 x 18650 battery (included) and with reverse battery protection.

Resistance measuring range: 0.01Ω to 9.99Ω (for checking coils)
Voltage Measuring range: 0.3v to 9.99v (for checking e-cigarette batteries)
510 threaded with spring loaded pin.
Stable platform for building your coils.
OLED display.
Measures voltage drop.

USB Charging port.

The function selector switch has 3 settings:
I = Switches on the resistance and voltage meter,
O = Power off
II = Burning mode.

Magnetic battery cover.

Requires 1 x 18650 Battery

If you need any further convincing as to whether you need the 521 TAB V2 in your toolbox watch the 8 minute video from Eycotech: https://www.youtube.com/watch?v=-8dGlopTlkc

Colour: Red

Package includes: 1 x 521 TAB V2 Meter, Negative and Positive Terminal cables with crocodile clips, 1 x Voltage Checker Attachment, 1 x Micro USB Cable and User Manual.

Check out our Rebuildables: Click Here

Buyer must be aged 18 year or above.

5 reviews for 521 TAB V2 Multi Function Ohms Meter from Eycotech

  1. les rodgers (verified owner)

    The coil master I had was on the blink and this fitted the bill. Eycotech have made loads of vape gear and clones which from experience are as good if not better than the originals and this tab is no exception.
    Nicely presented in the box and the build quality is worthy of some of the bigger names.
    The magnetic base is very secure but easy to access the battery you will have to put in, it has a charge port but, most of us will have batteries and a dedicated charger to keep the batteries topped up, going by the coil master, it will keep the battery for a long time before charging. the leads for the ohm reader are short and I would only use them to get a rough idea of what your coil is reading, the deck itself is accurate with the build deck screwed on, not too firmly, it does not need to be. The voltage drop tester will not be used by me so I cannot comment on the accuracy but it should come in handy for the mech brigade!
    Very happy with it and would say that if you are looking for a tab, get this one for the quality there are no down sides to it.
    Last but not least, the customer service was superb from hog vaping and if I need to purchase again I will not hesitate.

    • Garry Russell (store manager)

      Thank you so much for the review Les 😀

  2. Mark Dickinson (verified owner)

    Verified reviewVerified review - view originalExternal link

    Great bit of kit, essential if building your own coils, especially if you’re using a mech mod. I’ve used mine for a few months now and have also bought a second for an admiring friend! Nice sturdy design, accurate readings, nice fire button and a handy inclusion of wires/clamps to test the resistance of your coil wire before you cut to length. You won’t find anything as good as this anywhere else – I’ve looked! All I advise is you use a good, strong, healthy battery and don’t over tighten your RDA onto the unit. Lastly, the service from Hog Vaping is second to none – speedy delivery, good communication and great customer service! Don’t hesitate, just get one!!

  3. Stephen Taylor (verified owner)

    Verified reviewVerified review - view originalExternal link

    Good quality product and so much cheaper than the other tab you can’t get your hands on. Very helpful and friendly to deal with. You won’t be disappointed. Keep up the good work.. and thanks very much for a positive experience.

  4. Pete Simpson (verified owner)

    Verified reviewVerified review - view originalExternal link

    I bought the Coil-master build kit, but the Tab in it had an intermittent fire button which was annoying.
    This one, is VERY certain and is, in my opinion, a far superior product and I am glad I found it.

  5. John Welch (verified owner)

    Verified reviewVerified review - view originalExternal link

    Fantastic service and fast delivery this ohm reader is ausome just what I was looking for build quality superb not cheap flimsy plastic but solid

    Uploaded image(s):

    Image #1 from John Welch
    Image #2 from John Welch
Add a review